Note: This product is available for DJI Mini 3 Pro. Not available for DJI Mini 3

Note: If you need Propeller Holder for DJI Mini 3. Please click on the image below.

Feature:

1. Effectively fix the propeller to prevent damage to the propeller when the aircraft is put into the backpack;
2. The integrated chassis design can effectively fit the body and play a protective role, without affecting the installation of the original lens cover;
3. Soft TPU material blade belt, will not scratch and squeeze the body and slender blades;
4. Quickly disassemble, effectively store the propeller, and easy to operate.

Description:
Material: TPU
Applicable models: for Mini 3 Pro
Color: Grey,
Net weight: 25.1g
Product size: 8.5*6*5.5cm

packing list:
1pcs Propeller Holder

Note:
1.Does not include Drones, Lens Caps and Organizers,
2.Transition: 1cm=10mm=0.39inch,
3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
4.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!

Feature:

1. Specially designed for Mini 3 Pro, these compact propellers provide quieter flight and powerful, stable momentum for the aircraft,
2. The propellers provide quieter flight and powerful, stable momentum for the aircraft.

Description:
Material: PC
Applicable models: for Mini 3 Pro
Color: Orange Edge, silver edge, gold edge
Net weight: 5.9g (1 pair), 9.9g (2 pairs), 17.9g (4 pairs)
Product size: 6.0*3.0 inch(diameter*pitch)

packing list :
2 pairs: (boxed)
Propeller (pair)*2
Screw*12
Screwdriver*1

Note:
1.Does not include Drone,
2.Transition: 1cm=10mm=0.39inch,
3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
4.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!

Feature:

1. the product mold integrated molding, effectively fixed front and rear propellers, to protect the propellers in the folded storage state, to prevent damage to the income backpack.
2. raised design above and below, leaving space not to squeeze damage to the propeller, while in the storage process to play a fixed propeller, so that it is not easy to run off / cross.
3. reasonably fixed propeller, fit the body, like a naked machine storage zero burden, while not affecting the installation of the original lens cap use.
4. quick release buckle design, to achieve rapid disassembly and installation.

Description:
Material: TPU
Applicable models: for Mini 3 Pro
Color: Grey, Orange
Net weight: 25.1g
Product size: 8.5*6*5.5cm
packing list:
1pcs Propeller Holder

Note:
1.Does not include Drones, Lens Caps and Organizers,
2.Transition: 1cm=10mm=0.39inch,
3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
4.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!

new style Feature:

1. the real machine is moulded to effectively fix the front and rear propellers, protecting the propellers in the folded and stored state and preventing damage to them when they are stored in the backpack.
2. will not crush and damage the propeller, while at the same time serving to hold the propeller in place during storage, making it less likely to wobble or cross.
3. reasonably fixed propellers, fitting the fuselage, while not affecting the use of the lens cover installed.
4. half wrap is the chassis design, the base can wrap the bottom motor of the drone when storing, to prevent debris from entering the motor.
5. two holes to adjust the tightness of the propeller, easy to install and remove.

Description:
Material: Silicone + ABS
Applicable models: for Mini 3, Mini 3 Pro
Color: Gray, orange
Net weight:0.55oz.(15.8g)
Package weight:0.96oz.(27.5g)
Product size:3.5*3.07*2.4in(8.9*7.8*6.1cm)
Package size:3.62*3.11*1.37in(9.2*7.9*3.5cm)

Packing list:
1pcs Propeller Holder

Lens cover Feature:

1. Translucent design, easy to observe the protection status of the gimbal,
2. Fit the body design, stable and not loose,
3. Protect the lens and sensor from collision with foreign objects and dust,
4. Fix the gimbal to protect the lens from being scratched at all times during transportation.

Tips: Please remove the protective cover before flying to avoid obstructing the movement of the GIMBAL.

Description:
Material: ABS
Applicable models: for Mini 3 Pro
Color:Transparent Black
Net weight: 11.5g
Product size: 7.2*6.8*5.1cm

Packing list:
1pcs Lens cover

Note:
1.Does not include the Drone,
2.Transition: 1cm=10mm=0.39inch,
3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
4. Please allow 1-3g error in weight. Make sure you don't mind before ordering,
5.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!